Goods Codes

Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15|mm

·

Not backed

7410 11

·

Of refined copper

7410 11 00 50

·

Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for Printed Circuit Boards and of Printed Circuit Boards in the printed circuit board industry

·

Backed

7410 21

·

Of refined copper

7410 21 00 10

·

Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil

7410 21 00 20

·

Foils, rolls composed of one layer of glass epoxy of 100|µm colaminated with refined copper foil on one or two sides of 35|µm with a tolerance of 10|% for use in the production of smart cards

7410 21 00 30

·

Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil

7410 21 00 40

·

Sheet or plates: -|consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or -|consisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15|mm

7410 21 00 50

·

Plates: -consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, -covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and -with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650

7410 21 00 55

·

Plates:- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,- with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,- with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,- with a comparative tracking index (CTI) of 600 or more

7411

Copper tubes and pipes

7411 10

·

Of refined copper

·

Of copper alloys

7411 21

·

Of copper-zinc base alloys (brass)

Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)

7411 29 00 00

·

Other

7412

Copper tube or pipe fittings (for example, couplings, elbows, sleeves)

7413

Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated

7413 00 00 10

·

With fittings attached, for use in civil aircraft

7413 00 00 20

·

Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed

7413 00 00 90

·

Other

7415

Nails, tacks, drawing pins, staples (other than those of heading|8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper

7415 10 00 00

·

Nails and tacks, drawing pins, staples and similar articles

·