74
COPPER AND ARTICLES THEREOF
7401 00 00 00
Copper mattes; cement copper (precipitated copper)
7402 00 00 00
Unrefined copper; copper anodes for electrolytic refining
7403
Refined copper and copper alloys, unwrought
7404
Copper waste and scrap
7404 00 10 00
·
Of refined copper
7405 00 00 00
Master alloys of copper
7406
Copper powders and flakes
7406 10 00 00
·
Powders of non-lamellar structure
7406 20 00 00
·
Powders of lamellar structure; flakes
7407
Copper bars, rods and profiles
7407 10 00 00
·
Of refined copper
·
Of copper alloys
7407 21
·
·
Of copper-zinc base alloys (brass)
7407 21 10 00
·
·
·
Bars and rods
7407 21 90 00
·
·
·
Profiles
7407 29 00 00
·
·
Other
7408
Copper wire
·
Of refined copper
7408 11 00 00
·
·
Of which the maximum cross-sectional dimension exceeds 6|mm
7409
Copper plates, sheets and strip, of a thickness exceeding 0,15|mm
7409 40 00 00
·
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
7409 90 00 00
·
Of other copper alloys
7410
Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15|mm
·
Not backed
7410 11
·
·
Of refined copper
7410 11 00 50
·
·
·
Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for Printed Circuit Boards and of Printed Circuit Boards in the printed circuit board industry
7410 11 00 90
·
·
·
Other
7410 12 00 00
·
·
Of copper alloys
·
Backed
7410 21
·
·
Of refined copper
7410 21 00 10
·
·
·
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
7410 21 00 20
·
·
·
Foils, rolls composed of one layer of glass epoxy of 100|µm colaminated with refined copper foil on one or two sides of 35|µm with a tolerance of 10|% for use in the production of smart cards
7410 21 00 30
·
·
·
Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil
7410 21 00 40
·
·
·
Sheet or plates: -|consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or -|consisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15|mm
7410 21 00 50
·
·
·
Plates: -consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, -covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and -with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650
7410 21 00 55
·
·
·
Plates:- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,- with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,- with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,- with a comparative tracking index (CTI) of 600 or more
7410 21 00 90
·
·
·
Other
7410 22 00 00
·
·
Of copper alloys
7411
Copper tubes and pipes
·
Of copper alloys
7411 21
·
·
Of copper-zinc base alloys (brass)
7411 21 10 00
·
·
·
Straight
7411 21 90 00
·
·
·
Other
7411 22 00 00
·
·
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
7411 29 00 00
·
·
Other
7412
Copper tube or pipe fittings (for example, couplings, elbows, sleeves)
7412 10 00 00
·
Of refined copper
7412 20 00 00
·
Of copper alloys
7413
Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated
7413 00 00 10
·
With fittings attached, for use in civil aircraft
7413 00 00 20
·
Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed
7413 00 00 90
·
Other
7415
Nails, tacks, drawing pins, staples (other than those of heading|8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper
7415 10 00 00
·
Nails and tacks, drawing pins, staples and similar articles
·
Other articles, not threaded
7415 21 00 00
·
·
Washers (including spring washers)
7415 29 00 00
·
·
Other
7418
Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper
7418 10
·
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
7418 10 10 00
·
·
Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof
7419
Other articles of copper
7419 20
·
Cast, moulded, stamped or forged, but not further worked
7419 20 00 10
·
·
Hand-made
7419 20 00 90
·
·
Other
XV Base metals and articles of base metal
-
COPPER AND ARTICLES THEREOF
-
·
Other articles of copper
-
·
·
Other
-
·
·
·
Springs
Start date
Footnotes
TN701
TN702
Applicable duty
Third country duty (103)
100
150
4.000%
R
ERGA OMNES (1011)
Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms (117)
140
0.000%
R
ERGA OMNES (1011)
EU003TM510
Condition B
C990
Airworthiness tariff suspension (119)
119
0.000%
R
ERGA OMNES (1011)
CD333
Condition C
C119
Tariff preference (142)
300
0.000%
R
Faroe Islands (FO)
Certificate of origin
U075U076U078U079N954N864U045U048U162U163
VAT
VAT (NLBTW)
ERGA OMNES (1011)
00800003
Condition 02
1150
0.000%
21.000%