7204 49 30 10

Ferrous products obtained by direct reduction of iron ore

7203 90 00 00

7204

Ferrous waste and scrap; remelting scrap ingots of iron or steel

7204 10 00 00

Waste and scrap of cast iron

·

Waste and scrap of alloy steel

7204 21

·

Of stainless steel

7204 21 10

·

Containing by weight 8|% or more of nickel

7204 21 90

·

Other

7204 29

·

Other

7204 30

·

Waste and scrap of tinned iron or steel

·

Other waste and scrap

7204 41

·

Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles

7204 41 10

·

Turnings, shavings, chips, milling waste, sawdust and filings

·

Trimmings and stampings

7204 41 91

·

In bundles

7204 41 99

·

Other

7204 49

·

Other

7204 49 10

·

Fragmentised (shredded)

·

Other

7204 49 30

·

In bundles

7204 49 90

·

Other

Remelting scrap ingots

7205

Granules and powders, of pig iron, spiegeleisen, iron or steel

7205 10 00 00

Granules

·

Powders

7206

Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading|7203)

7207

Semi-finished products of iron or non-alloy steel

·

Containing by weight less than 0,25|% of carbon

7207 11

·

Of rectangular (including square) cross-section, the width measuring less than twice the thickness

·

Rolled or obtained by continuous casting

7207 11 11 00

Of free-cutting steel

·

Other

7207 11 14 00

Of a thickness not exceeding 130|mm

7207 11 16 00

Of a thickness exceeding 130|mm

7207 11 90 00

7207 12

·

Other, of rectangular (other than square) cross-section

7207 12 10 00

7207 12 90 00

7207 19

·

Other

·

Of circular or polygonal cross-section

7207 19 12 00

7207 19 19 00

7207 19 80

·

Other

7207 19 80 10

Blanks for angles, shapes and sections, rolled or obtained by continuous casting

7207 19 80 90

7207 20

·

Containing by weight 0,25|% or more of carbon

·

Of rectangular (including square) cross-section, the width measuring less than twice the thickness

·

Rolled or obtained by continuous casting

7207 20 11 00

Of free-cutting steel

·

Other, containing by weight

7207 20 15 00

0,25|% or more but less than 0,6|% of carbon

7207 20 17 00

0,6|% or more of carbon

7207 20 19 00

·

Other, of rectangular (other than square) cross-section

7207 20 32 00

7207 20 39 00

·

Of circular or polygonal cross-section

7207 20 52 00

7207 20 59 00

7207 20 80

·

Other

7207 20 80 10

Blanks for angles, shapes and sections, rolled or obtained by continuous casting

7207 20 80 90

7208

Flat-rolled products of iron or non-alloy steel, of a width of 600|mm or more, hot-rolled, not clad, plated or coated

7208 10 00 00

In coils, not further worked than hot-rolled, with patterns in relief

·

Other, in coils, not further worked than hot-rolled, pickled

7208 25 00 00

Of a thickness of 4,75|mm or more

7208 26 00 00

Of a thickness of 3|mm or more but less than 4,75|mm

7208 27 00 00

Of a thickness of less than 3|mm

·

Other, in coils, not further worked than hot-rolled

7208 36 00 00

Of a thickness exceeding 10|mm

7208 37

·

Of a thickness of 4,75|mm or more but not exceeding 10|mm

7208 37 00 10

Intended for re-rolling

7208 37 00 90

7208 38

·

Of a thickness of 3|mm or more but less than 4,75|mm

7208 38 00 10

Intended for re-rolling

7208 38 00 90

7208 39

·

Of a thickness of less than 3|mm

7208 39 00 10

Intended for re-rolling

7208 39 00 90

7208 40

·

Not in coils, not further worked than hot-rolled, with patterns in relief

7208 40 00 10

Of a thickness of 2 mm or more

7208 40 00 90

Of a thickness of less than 2 mm

·

Other, not in coils, not further worked than hot-rolled

7208 51

·

Of a thickness exceeding 10|mm

7208 51 20

·

Of a thickness exceeding 15|mm

7208 51 20 10

7208 51 20 90

·

Of a thickness exceeding 10|mm but not exceeding 15|mm, of a width of

7208 51 91

·

2|050|mm or more

7208 51 91 10

7208 51 91 90

7208 51 98

·

Less than 2|050|mm

7208 51 98 10

7208 51 98 90

7208 52

·

Of a thickness of 4,75|mm or more but not exceeding 10|mm

7208 52 10 00

Rolled on four faces or in a closed box pass, of a width not exceeding 1|250|mm

·

Other, of a width of

7208 52 91

·

2|050|mm or more

7208 52 91 10

7208 53

·

Of a thickness of 3|mm or more but less than 4,75|mm

7208 53 10 00

Rolled on four faces or in a closed box pass, of a width not exceeding 1|250|mm and of a thickness of 4|mm or more

Of a thickness of less than 3|mm

7208 90

·

Other

7208 90 20

·

Perforated

7208 90 80

·

Other

7208 90 80 10

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7208 90 80 20

Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

7208 90 80 90

7209

Flat-rolled products of iron or non-alloy steel, of a width of 600|mm or more, cold-rolled (cold-reduced), not clad, plated or coated

·

In coils, not further worked than cold-rolled (cold-reduced)

7209 15

·

Of a thickness of 3|mm or more

7209 16

·

Of a thickness exceeding 1|mm but less than 3|mm

7209 17

·

Of a thickness of 0,5|mm or more but not exceeding 1|mm

7209 18

·

Of a thickness of less than 0,5|mm

7209 18 10 00

'Electrical'

·

Other

7209 18 91 00

Of a thickness of 0,35|mm or more but less than 0,5|mm

7209 18 99

·

Of a thickness of less than 0,35|mm

7209 18 99 10

Annealed (known as 'black plates')

7209 18 99 90

·

Not in coils, not further worked than cold-rolled (cold-reduced)

7209 25

·

Of a thickness of 3|mm or more

7209 26

·

Of a thickness exceeding 1|mm but less than 3|mm

7209 27

·

Of a thickness of 0,5|mm or more but not exceeding 1|mm

7209 28

·

Of a thickness of less than 0,5|mm

7209 90

·

Other

7209 90 20 00

Perforated

7209 90 80

·

Other

7209 90 80 10

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7209 90 80 90

7210

Flat-rolled products of iron or non-alloy steel, of a width of 600|mm or more, clad, plated or coated

·

Plated or coated with tin

7210 11

·

Of a thickness of 0,5|mm or more

7210 11 00 10

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7210 11 00 90

7210 12

·

Of a thickness of less than 0,5|mm

7210 12 20

·

Tinplate

7210 12 20 10

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7210 12 20 90

7210 12 80

·

Other

7210 12 80 10

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7210 12 80 90

7210 20

·

Plated or coated with lead, including terne-plate

7210 20 00 10

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7210 20 00 90

7210 30

·

Electrolytically plated or coated with zinc

7210 30 00 10

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7210 30 00 90

·

Otherwise plated or coated with zinc

7210 41

·

Corrugated

7210 41 00 20

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 41 00 30

Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 41 00 80

7210 49

·

Other

7210 49 00 20

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 49 00 30

Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 49 00 80

7210 50

·

Plated or coated with chromium oxides or with chromium and chromium oxides

7210 50 00 10

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7210 50 00 90

·

Plated or coated with aluminium

7210 61

·

Plated or coated with aluminium-zinc alloys

7210 61 00 20

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 61 00 30

Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 61 00 80

7210 69

·

Other

7210 69 00 20

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 69 00 30

Plated or coated by hot dip galvanisation with aluminium and/or magnesium, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 69 00 80

7210 70

·

Painted, varnished or coated with plastics

7210 70 10

·

Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished

7210 70 80

·

Other

·

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

7210 70 80 11

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

·

Other

7210 70 80 20

7210 70 80 25

·

Other

7210 70 80 91

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

·

Other

7210 70 80 92

7210 70 80 95

7210 90

·

Other

7210 90 30 00

Clad

7210 90 40

·

Tinned and printed

7210 90 40 10

Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)

7210 90 40 90

7210 90 80

·

Other

7210 90 80 20

Coated or plated with tin, whether or not coated with a plastic material and/or varnished

·

Other

7210 90 80 91

Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)

7210 90 80 92

Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7210 90 80 99

7211

Flat-rolled products of iron or non-alloy steel, of a width of less than 600|mm, not clad, plated or coated

·

Not further worked than hot-rolled

7211 13

·

Rolled on four faces or in a closed box pass, of a width exceeding 150|mm and a thickness of not less than 4|mm, not in coils and without patterns in relief

7211 13 00 11

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

7211 13 00 19

7211 14

·

Other, of a thickness of 4,75|mm or more

7211 14 00 10

·

Of a width not exceeding 500 mm

7211 14 00 91

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

7211 14 00 95

7211 19

·

Other

7211 19 00 10

·

Of a width not exceeding 500 mm

7211 19 00 91

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

7211 19 00 95

·

Not further worked than cold-rolled (cold-reduced)

7211 23

·

Containing by weight less than 0,25|% of carbon

7211 23 20

·

'Electrical'

7211 23 20 10

7211 23 20 90

·

Other

7211 23 30

·

Of a thickness of 0,35|mm or more

7211 23 30 10

·

Of a width not exceeding 500 mm

7211 23 30 91

In coils intended for the manufacture of tinplate

7211 23 30 99

7211 23 80

·

Of a thickness of less than 0,35|mm

·

Of a width exceeding 500 mm

7211 23 80 11

In coils, annealed (known as 'black plates')

7211 23 80 19

·

Of a width not exceeding 500 mm

·

In coils intended for the manufacture of tinplate

7211 23 80 93

Annealed (known as 'black plates')

7211 23 80 95

·

Other

7211 23 80 97

In coils, annealed (known as 'black plates')

7211 23 80 99

7211 29

·

Other

·

Of a width exceeding 500 mm

·

Of a width not exceeding 500 mm

7211 90

·

Other

7211 90 20 00

Perforated

7211 90 80

·

Other

·

Of a width exceeding|500|mm

7211 90 80 10

7212

Flat-rolled products of iron or non-alloy steel, of a width of less than 600|mm, clad, plated or coated

7212 10

·

Plated or coated with tin

7212 10 10 00

Tinplate, not further worked than surface-treated

7212 10 90

·

Other

·

Of a width exceeding|500|mm

7212 10 90 11

7212 20

·

Electrolytically plated or coated with zinc

·

Of a width exceeding 500 mm

7212 20 00 11

7212 30

·

Otherwise plated or coated with zinc

7212 30 00 20

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7212 30 00 30

Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7212 30 00 80

7212 40

·

Painted, varnished or coated with plastics

7212 40 20

·

Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished

7212 40 20 10

Tinplate, not further worked than varnished

·

Other

·

Of a width exceeding|500|mm

7212 40 20 91

7212 40 80

·

Other

·

Of a width exceeding 500 mm

·

Not further worked than surface-treated

7212 40 80 01

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

·

Other

7212 40 80 12

7212 40 80 15

·

Other

7212 40 80 21

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

·

Other

7212 40 80 30

7212 40 80 35

·

Of a width not exceeding 500 mm

·

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc)

7212 40 80 80

7212 40 80 82

·

Other

7212 40 80 85

7212 40 80 87

7212 50

·

Otherwise plated or coated

7212 50 20

·

Plated or coated with chromium oxides or with chromium and chromium oxides

·

Of a width exceeding|500|mm

7212 50 20 11

7212 50 30

·

Plated or coated with chromium or nickel

·

Of a width exceeding|500|mm

7212 50 30 11

7212 50 40

·

Plated or coated with copper

·

Of a width exceeding|500|mm

7212 50 40 11

·

Plated or coated with aluminium

7212 50 61

·

Plated or coated with aluminium-zinc alloys

7212 50 61 20

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7212 50 61 30

Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7212 50 61 80

7212 50 69

·

Other

7212 50 69 20

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7212 50 69 30

Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7212 50 69 80

7212 50 90

·

Other

·

Of a width exceeding|500|mm

7212 50 90 11

Silvered, gilded, platinum-plated or enamelled

·

Other

7212 50 90 13

7212 50 90 14

Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7212 50 90 19

·

Of a width not exceeding|500|mm

7212 50 90 92

Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7213

Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel

7213 10 00 00

Containing indentations, ribs, grooves or other deformations produced during the rolling process

7213 20 00 00

Other, of free-cutting steel

·

Other

7213 91

·

Of circular cross-section measuring less than 14|mm in diameter

7213 91 10 00

Of a type used for concrete reinforcement

7213 91 20 00

Of a type used for tyre cord

·

Other

7213 91 41 00

Containing by weight 0,06|% or less of carbon

7213 91 49 00

Containing by weight more than 0,06|% but less than 0,25|% of carbon

7213 91 70 00

Containing by weight 0,25|% or more but not more than 0,75|% of carbon

7213 91 90 00

Containing by weight more than 0,75|% of carbon

7213 99

·

Other

7213 99 10 00

Containing by weight less than 0,25|% of carbon

7213 99 90 00

Containing by weight 0,25|% or more of carbon

7214

Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling

7214 10

·

Forged

7214 10 00 10

Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars

7214 10 00 90

7214 20

·

Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

7214 20 00 10

High fatigue performance concrete reinforcing bars and rods

·

Other

7214 20 00 20

Concrete reinforcement bars and rods excluding long products, such as round bars

7214 20 00 80

7214 30

·

Other, of free-cutting steel

7214 30 00 10

Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars

7214 30 00 90

·

Other

7214 91

·

Of rectangular (other than square) cross-section

7214 91 10

·

Containing by weight less than 0,25|% of carbon

7214 91 10 10

Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars

7214 91 10 90

7214 91 90

·

Containing by weight 0,25|% or more of carbon

7214 91 90 10

Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars

7214 91 90 90

7214 99

·

Other

·

Containing by weight less than 0,25|% of carbon

7214 99 10

·

Of a type used for concrete reinforcement

7214 99 10 10

Bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance bars and rods, and excluding other long products, such as round bars

7214 99 10 90

·

Other, of circular cross-section measuring in diameter

·

Containing by weight 0,25|% or more of carbon

·

Of a circular cross-section measuring in diameter

7214 99 95

·

Other

7214 99 95 10

Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars

7214 99 95 90

7215

Other bars and rods of iron or non-alloy steel

7215 10 00 00

Of free-cutting steel, not further worked than cold-formed or cold-finished

7215 50

·

Other, not further worked than cold-formed or cold-finished

·

Containing by weight less than 0,25|% of carbon

7215 50 11 00

Of rectangular (other than square) cross-section

Containing by weight 0,25|% or more of carbon

7215 90

·

Other

7215 90 00 10

Hot-rolled, hot-drawn or extruded, not further worked than clad

7215 90 00 90

7216

Angles, shapes and sections of iron or non-alloy steel

7216 10 00 00

U, I or H|sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80|mm

·

L or T|sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80|mm

·

U, I or H|sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80|mm or more

7216 31

·

U|sections

7216 31 10 00

Of a height of 80|mm or more but not exceeding 220|mm

7216 31 90 00

Of a height exceeding 220|mm

7216 32

·

I|sections

·

Of a height of 80|mm or more but not exceeding 220|mm

7216 32 11 00

With parallel flange faces

7216 32 19 00

·

Of a height exceeding 220|mm

7216 32 91 00

With parallel flange faces

7216 32 99 00

7216 33

·

H|sections

7216 33 10 00

Of a height of 80|mm or more but not exceeding 180|mm

7216 33 90 00

Of a height exceeding 180|mm

7216 40

·

L or T|sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80|mm or more

7216 50

·

Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded

7216 50 10 00

With a cross-section which is capable of being enclosed in a square the side of which is 80|mm

·

Other

7216 50 91

·

Bulb flats

7216 50 91 10

In the range up to 204 mm width

·

Angles, shapes and sections, not further worked than cold-formed or cold-finished

7216 61

·

Obtained from flat-rolled products

7216 61 10 00

C, L, U, Z, omega or open-ended sections

·

Other

7216 91

·

Cold-formed or cold-finished from flat-rolled products

7216 91 10 00

Profiled (ribbed) sheets

7216 91 80 00

7216 99

·

Other

7216 99 00 10

Hot-rolled, hot-drawn or extruded, not further worked than clad

7216 99 00 90

7217

Wire of iron or non-alloy steel

7217 10

·

Not plated or coated, whether or not polished

·

Containing by weight less than 0,25|% of carbon

7217 10 10 00

With a maximum cross-sectional dimension of less than 0,8|mm

·

With a maximum cross-sectional dimension of 0,8|mm or more

7217 10 31 00

Containing indentations, ribs, grooves or other deformations produced during the rolling process

Containing by weight 0,25|% or more but less than 0,6|% of carbon

7217 10 90

·

Containing by weight 0,6|% or more of carbon

7217 10 90 10

Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3|mm

7217 10 90 90

7217 20

·

Plated or coated with zinc

·

Containing by weight less than 0,25|% of carbon

7217 20 10 00

With a maximum cross-sectional dimension of less than 0,8|mm

7217 20 30 00

With a maximum cross-sectional dimension of 0,8|mm or more

7217 20 50 00

Containing by weight 0,25|% or more but less than 0,6|% of carbon

7217 20 90

·

Containing by weight 0,6|% or more of carbon

7217 20 90 10

Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3|mm

7217 20 90 90

Containing by weight 0,25|% or more but less than 0,6|% of carbon

7217 30

·

Plated or coated with other base metals

·

Containing by weight less than 0,25|% of carbon

7217 30 90 00

Containing by weight 0,6|% or more of carbon

7217 90

·

Other

7217 90 20 00

Containing by weight less than 0,25|% of carbon

7217 90 50 00

Containing by weight 0,25|% or more but less than 0,6|% of carbon

7217 90 90 00

Containing by weight 0,6|% or more of carbon

7218

Stainless steel in ingots or other primary forms; semi-finished products of stainless steel

7218 10 00 00

Ingots and other primary forms

·

Other

7218 91

·

Of rectangular (other than square) cross-section

7218 91 10 00

7218 91 80 00

7218 99

·

Other

·

Of square cross-section

7218 99 11 00

Rolled or obtained by continous casting

7218 99 19 00

·

Other

7218 99 20 00

7218 99 80 00

7219

Flat-rolled products of stainless steel, of a width of 600|mm or more

·

Not further worked than hot-rolled, in coils

7219 11

·

Of a thickness exceeding 10|mm

7219 11 00 10

7219 11 00 90

7219 12

·

Of a thickness of 4,75|mm or more but not exceeding 10|mm

7219 12 10

·

Containing by weight 2,5|% or more of nickel

7219 12 10 10

7219 12 10 90

7219 12 90

·

Containing by weight less than 2,5|% of nickel

7219 12 90 10

7219 12 90 90

7219 13

·

Of a thickness of 3|mm or more but less than 4,75|mm

7219 13 10

·

Containing by weight 2,5|% or more of nickel

7219 13 10 10

7219 13 10 90

7219 13 90

·

Containing by weight less than 2,5|% of nickel

7219 13 90 10

7219 13 90 90

7219 14

·

Of a thickness of less than 3|mm

7219 14 10

·

Containing by weight 2,5|% or more of nickel

7219 14 10 10

7219 14 10 90

7219 14 90

·

Containing by weight less than 2,5|% of nickel

7219 14 90 10

7219 14 90 90

·

Not further worked than hot-rolled, not in coils

7219 21

·

Of a thickness exceeding 10|mm

7219 21 10 00

7219 21 90 00

7219 22

·

Of a thickness of 4,75|mm or more but not exceeding 10|mm

7219 22 10

·

Containing by weight 2,5|% or more of nickel

7219 22 10 10

7219 22 10 90

7219 22 90

·

Containing by weight less than 2,5|% of nickel

7219 22 90 10

7219 22 90 90

7219 23

·

Of a thickness of 3|mm or more but less than 4,75|mm

7219 23 00 10

7219 23 00 90

7219 24

·

Of a thickness of less than 3|mm

7219 24 00 10

7219 24 00 90

·

Not further worked than cold-rolled (cold-reduced)

7219 31

·

Of a thickness of 4,75|mm or more

7219 31 00 10

7219 31 00 20

7219 31 00 20

7219 31 00 90

7219 32

·

Of a thickness of 3|mm or more but less than 4,75|mm

7219 32 10

·

Containing by weight 2,5|% or more of nickel

7219 32 10 10

7219 32 10 20

7219 32 10 20

7219 32 10 90

7219 32 90

·

Containing by weight less than 2,5|% of nickel

7219 32 90 10

7219 32 90 20

7219 32 90 20

7219 32 90 90

7219 33

·

Of a thickness exceeding 1|mm but less than 3|mm

7219 33 10

·

Containing by weight 2,5|% or more of nickel

7219 33 10 10

7219 33 10 20

7219 33 10 20

7219 33 10 90

7219 33 90

·

Containing by weight less than 2,5|% of nickel

7219 33 90 10

7219 33 90 20

7219 33 90 20

7219 33 90 90

7219 34

·

Of a thickness of 0,5|mm or more but not exceeding 1|mm

7219 34 10

·

Containing by weight 2,5|% or more of nickel

7219 34 10 10

7219 34 10 20

7219 34 10 20

7219 34 10 90

7219 34 90

·

Containing by weight less than 2,5|% of nickel

7219 34 90 10

7219 34 90 20

7219 34 90 20

7219 34 90 90

7219 35

·

Of a thickness of less than 0,5|mm

7219 35 10

·

Containing by weight 2,5|% or more of nickel

7219 35 10 10

7219 35 10 20

7219 35 10 20

7219 35 10 90

7219 35 90

·

Containing by weight less than 2,5|% of nickel

7219 35 90 10

7219 35 90 20

7219 35 90 20

7219 35 90 90

7219 90

·

Other

7219 90 20

·

Perforated

7219 90 20 10

7219 90 20 20

7219 90 20 20

7219 90 20 90

7219 90 80

·

Other

7219 90 80 10

7219 90 80 20

7219 90 80 20

7219 90 80 90

7220

Flat-rolled products of stainless steel, of a width of less than 600|mm

·

Not further worked than hot-rolled

7220 11

·

Of a thickness of 4,75|mm or more

7220 11 00 10

7220 11 00 90

7220 12

·

Of a thickness of less than 4,75|mm

7220 12 00 10

7220 12 00 90

7220 20

·

Not further worked than cold-rolled (cold-reduced)

·

Of a thickness of 3|mm or more, containing by weight

7220 20 21

·

2,5|% or more of nickel

7220 20 21 10

7220 20 21 20

7220 20 21 20

7220 20 21 90

7220 20 29

·

Less than 2,5|% of nickel

7220 20 29 10

7220 20 29 20

7220 20 29 20

7220 20 29 90

·

Of a thickness exceeding 0,35|mm but of less than 3|mm, containing by weight

7220 20 41

·

2,5|% or more of nickel

7220 20 41 10

7220 20 41 20

7220 20 41 20

7220 20 41 90

7220 20 49

·

Less than 2,5|% of nickel

7220 20 49 10

7220 20 49 20

7220 20 49 20

7220 20 49 90

·

Of a thickness not exceeding 0,35|mm, containing by weight

7220 20 81

·

2,5|% or more of nickel

7220 20 81 10

7220 20 81 20

7220 20 81 20

7220 20 81 90

7220 20 89

·

Less than 2,5|% of nickel

7220 20 89 10

7220 20 89 20

7220 20 89 20

7220 20 89 90

7220 90

·

Other

7220 90 20

·

Perforated

7220 90 20 10

7220 90 20 20

7220 90 20 20

7220 90 20 90

7220 90 80

·

Other

7220 90 80 10

7220 90 80 20

7220 90 80 20

7220 90 80 90

7221

Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel

7221 00 10 00

7221 00 90 00

7222

Other bars and rods of stainless steel; angles, shapes and sections of stainless steel

·

Bars and rods, not further worked than hot-rolled, hot-drawn or extruded

7222 11

·

Of circular cross-section

·

Of a diameter of 80|mm or more, containing by weight

7222 11 11 00

7222 11 19 00

·

Of a diameter of less than 80|mm, containing by weight

7222 11 81 00

7222 11 89 00

7222 19

·

Other

7222 19 10 00

7222 19 90 00

7222 20

·

Bars and rods, not further worked than cold-formed or cold-finished

·

Of circular cross-section

·

Of a diameter of 80|mm or more, containing by weight

7222 20 11 00

7222 20 19 00

·

Of a diameter of 25|mm or more, but less than 80|mm, containing by weight

7222 20 21 00

7222 20 29 00

·

Of a diameter of less than 25|mm, containing by weight

7222 20 31 00

7222 20 39 00

·

Other, containing by weight

7222 20 81 00

7222 20 89 00

7222 30

·

Other bars and rods

·

Forged, containing by weight

7222 30 51 00

7222 30 91 00

7222 30 97

·

Other

7222 30 97 10

Hot-rolled, hot-drawn or extruded, not further worked than clad

7222 30 97 90

7222 40

·

Angles, shapes and sections

7222 40 10 00

Not further worked than hot-rolled, hot-drawn or extruded

7222 40 50 00

Not further worked than cold-formed or cold-finished

7222 40 90

·

Other

7222 40 90 10

Hot-rolled, hot-drawn or extruded, not further worked than clad

7222 40 90 90

7223

Wire of stainless steel

·

Containing by weight 2,5|% or more of nickel

7223 00 11 00

Containing by weight 28|% or more but not more than 31|% of nickel and 20|% or more but not more than 22|% of chromium

7223 00 19 00

·

Containing by weight less than 2,5|% of nickel

7223 00 91 00

Containing by weight 13|% or more but not more than 25|% of chromium and 3,5|% or more but not more than 6|% of aluminium

7223 00 99 00

7224

Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel

7224 10

·

Ingots and other primary forms

7224 90

·

Other

7224 90 02

·

Of tool steel

7224 90 02 29

Of rectangular (including square) cross-section

·

Other

7224 90 02 89

Hot-rolled or obtained by continuous casting

7224 90 02 99

·

Other

·

Of rectangular (including square) cross-section

·

Hot-rolled or obtained by continuous casting

·

The width measuring less than twice the thickness

·

Other

·

Hot-rolled or obtained by continuous casting

7225

Flat-rolled products of other alloy steel, of a width of 600|mm or more

·

Of silicon-electrical steel

7225 11

·

Grain-oriented

·

Of a thickness exceeding 0,16|mm

7225 11 00 11

With a maximum core loss not higher than 0.9 W/kg

7225 11 00 15

With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg

7225 11 00 19

With a maximum core loss higher than 1,05 W/kg

7225 11 00 90

7225 19

·

Other

7225 19 10

·

Hot-rolled

7225 19 10 10

Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10|mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4,75|mm or more but not exceeding 10 mm and of a width of 2|050|mm or more

7225 30

·

Other, not further worked than hot-rolled, in coils

7225 30 10 00

Of tool steel

7225 30 30

·

Of high-speed steel

7225 30 30 10

Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

7225 40

·

Other, not further worked than hot-rolled, not in coils

·

Other

7225 40 40 00

Of a thickness exceeding 10|mm

7225 40 60

·

Of a thickness of 4,75|mm or more but not exceeding 10|mm

7225 40 60 10

Of a width of 2|050|mm or more

Of a thickness of less than 4,75|mm

7225 50

·

Other, not further worked than cold-rolled (cold-reduced)

7225 50 20

·

Of high-speed steel

7225 50 20 10

Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

·

Other

7225 91

·

Electrolytically plated or coated with zinc

7225 91 00 10

Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

7225 91 00 90

7225 92

·

Otherwise plated or coated with zinc

7225 92 00 20

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7225 92 00 30

Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7225 92 00 80

7225 99

·

Other

·

Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

7225 99 00 11

Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

7225 99 00 22

Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7225 99 00 23

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

·

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7225 99 00 45

·

Other

7225 99 00 91

Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

7225 99 00 92

Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7225 99 00 93

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7225 99 00 95

7226

Flat-rolled products of other alloy steel, of a width of less than 600|mm

·

Of silicon-electrical steel

7226 11

·

Grain-oriented

·

Of a width exceeding 500 mm

·

Of a thickness exceeding 0,16|mm

7226 11 00 12

With a maximum core loss not higher than 0.9 W/kg

7226 11 00 14

With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg

7226 11 00 16

With a maximum core loss higher than 1,05 W/kg

7226 11 00 19

·

Of a width not exceeding 500 mm

·

Of a thickness exceeding 0,16|mm

7226 11 00 92

With a maximum core loss not higher than 0.9 W/kg

7226 11 00 94

With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg

7226 11 00 96

With a maximum core loss higher than 1,05 W/kg

7226 11 00 99

7226 19

·

Other

7226 19 10

·

Not further worked than hot-rolled

7226 19 10 10

Products clad, plated or coated

·

Other

7226 19 10 91

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

7226 19 10 95

7226 19 80

·

Other

7226 19 80 10

7226 19 80 90

7226 20 00 00

Of high-speed steel

·

Other

7226 91

·

Not further worked than hot-rolled

7226 91 20 00

Of tool steel

·

Other

7226 91 91

·

Of a thickness of 4,75|mm or more

7226 91 91 11

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

Of a thickness of less than 4,75|mm

7226 92

·

Not further worked than cold-rolled (cold-reduced)

7226 92 00 10

Of a width exceeding|500|mm

7226 92 00 90

7226 99

·

Other

7226 99 10 00

Electrolytically plated or coated with zinc

7226 99 30

·

Otherwise plated or coated with zinc

7226 99 30 10

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7226 99 30 30

Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7226 99 30 90

7226 99 70

·

Other

·

Of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding

7226 99 70 11

Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

7226 99 70 13

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0,5% of carbon, not more than 1,1% of aluminium, not more than 0,12% of niobium, not more than 0,17% of titanium and not more than 0,15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

7226 99 70 19